Peugeot 208 Key Replacement
Peugeot 208 key replacement should be left to professional auto locksmiths who have the appropriate equipment and know-how. They can program and create keys quicker and more efficiently than dealers.
If your key fob stopped locking or unlocking your doors, it is likely due to a dead battery in the coin. However, there are many other reasons why the key might be malfunctioning.
Dead Coin Battery
A dead battery can stop your Peugeot 208 from locking and unlocking, and also making it impossible to start the engine. In this instance you'll need make use of the alternative method for starting as described in your vehicle's owner's manual.
Another reason why your 208 might not be starting is that the spark plugs have been damaged. The spark plugs ignite fuel to start the engine. They are only able to last for a short time. They'll eventually fail when they aren't used enough.
Luckily, there is an easy solution to this problem. The best solution is to check the voltage of your car battery with a multimeter. If it's lower than 11.5 volts and you are not satisfied, then it is time to replace it. It is also necessary to clean the contacts of the battery in the event that it is damaged by corrosion. You can do this by lifting the rubber covers that cover both battery terminals and using wire brushes to clean any parts that are corroded from the battery. After peugeot 308 key replacement , you need to connect the positive and negative pole cables.
Water Damage
If your 208 will not start and the battery hasn't fallen flat, it is time to inspect the spark plugs. It is possible that they're dirty, causing them not to spark. This can be fixed easily by cleaning the spark plugs in the workshop.
Peugeot automobiles use transponder keys that works with the car's immobiliser system. This ensures that only the right key is able to turn the engine. If the chip inside the Peugeot key is damaged, it will not transmit the correct signal to the vehicle.
This is a very common issue that is caused by water damage. This is especially prevalent in colder climates where the vehicle could have been exposed to snow or rain. If this is the case, you should seek out a reputable auto locksmith who has all the equipment and tools needed to reprogram the new key. They'll also have the latest technology and equipment required to make a Peugeot smart key. The process shouldn't be more than 15 minutes.
Contacts of the battery may be damaged.
Peugeot replaced the old transponder chips using a new type that uses electronic components mounted on a circuit board. The new system is fantastic when it's new, but the circuit boards begin to degrade with time and cease to function properly.
This could prevent the immobiliser from working, so your vehicle will not start. Contact a Peugeot specialist or a locksmith if this is the case.
Another common issue is when the key fob battery begins to fail, which causes the blade of the key to stop being able to feed into the lock. A locksmith in your car will replace the battery and then cut a fresh blade for you. This is a quick solution.
Faulty Receiver Module
If your Peugeot key fob was not working after dropping it on the floor, or being exposed to a sudden rain or accidentally washing it or washing it, it could be due to a faulty receiver module. The receiver module is responsible for transmitting radio frequency to the onboard computer that regulates the central locking system of your Peugeot vehicle.
The key fob itself is fitted with rubber seals that prevent water from getting to the electronic chip inside. However, prolonged exposure to water can be able to penetrate these seals and cause damage to the chip. Submerging the key fob in ocean water on the beach or throwing it into the water can be particularly damaging due to the high salt content.
If your Peugeot spare key fob doesn't work You'll need the module replaced. This can only by done by a Peugeot specialist or a professional auto locksmith. Peugeot keys, unlike other cars, are secured by an immobilizer system. This requires the right programming to allow the car to start. This is the reason that you should only trust an authorized Peugeot locksmith to create and program the replacement.
Faulty On-Board Computer
The on-board computer of your Peugeot is responsible for a variety of systems inside your car, including power windows and airbags. If something is wrong with these systems, it will usually display a code that indicates the problem. This code is saved in the system and remains there until the problem is solved. This will often require the on-board computers to be replaced.
One of the main reasons for the light flashing is loose or corroded connections within the airbag sensor. This could be due to wear and tear, aging or exposure to moisture and salt. This issue must be addressed as soon you can, since an airbag that is malfunctioning could pose danger in the event in the event of an accident.
If you find the error "card not found" on your Peugeot key fob, the battery inside the key fob might be dead or weak. This can prevent the key fob from sending a signal that disables the immobilizer on your vehicle's standard. Test this by pressing the unlock button on the key fob and then trying to start your car. If this does not work then the battery in the key fob is in need of replacement.